Aerox® to Exhibit Oxygen System Products and FAA TSO Approved Aviation Oxygen Masks at NBAA 2015

Aerox® Aviation Oxygen Systems will display the latest in aviation oxygen products and technologies during the 2015 NBAA Convention held at the Las Vegas Convention Center in Las Vegas, NV, November 17 – 19, 2015. Aerox will be located in the Central Hall, Booth C13048.

Oxygen, essential for human life, is abundant at ground level but diminishes as flight levels increase, necessitating the requirement for supplemental oxygen in the upper flight regimes.

Aerox is one of the only U.S. manufacturers to offer a complete line of FAA Approved TSO-C103 continuous flow oxygen masks such as the 4110-711 and 4110-712 series and FAA TSO-C78A and TSO-C89A approved, quick donning, diluter-demand style oxygen masks (4110-725).

Diluter-demand masks from Aerox flow oxygen when a user inhales (or demands it) and also allows outside air to be mixed with the flow of oxygen. Operated in this way, Aerox diluter-demand masks can safely and effectively reduce the amount of oxygen used in flight, allowing the supply of oxygen to last longer.

The Aerox Quick Donning Diluter/Demand (4110-725) Series mask is intended to be used by crew and passengers in the general aviation industry up to an altitude of 40,000 feet MSL.

Key features of the Aerox 4110-725 aviation masks include:

 -          Inflatable Quick Comfort head harness provides maximum comfort and fast donning.

-          Soft silicon rubber for excellent face seal capabilities.

-          Built in electret microphone.

-          Lightweight and durable carbon-fiber construction.

-          Approved by the FAA to meet TSO-C78A (flow rate) and TSO-C89A requirements.

-          Customized to fit most aircraft and portable system outlets.

-          Available carbon fiber storage cup.

In addition, Aerox portable prO²-2 and prO²-4, Personal Emergency O² Systems provide take anywhere convenience and safety at a reasonable cost.   This system is designed to provide oxygen based on a cabin pressure of 25,000 feet and will flow at this set rate for 17 minutes, so that you have time to get down to a safe altitude where you can breathe normally under the conditions. Simple to use when needed, just pull the mask and don. The motion of pulling the mask pulls a cable that initiates the flow of oxygen.  The prO² systems come standard with aluminum DOT 3AL cylinders that have no life limits and require recertification every 5 years.

If you can carry a soft drink can, you can carry the portable prO² systems.

About Aerox® Oxygen Systems, Inc.

As the originator of high-duration oxygen systems, Aerox continues to lead the industry in research and development of new products and innovative systems that deliver the performance, durability and comfort demanded by aviators around the world. From oxygen system accessories and retrofit solutions to cannulas and portable oxygen systems, pilots and passengers around the world have depended on Aerox products to keep them healthy, alert and safe in the air.

Aerox® Oxygen Systems, Inc. designs and builds innovative, high-duration oxygen systems made specifically for the aviation industry. Since 1981, pilots and passengers around the world have depended on Aerox O²  aviation masks, cannulas, cylinder tanks, portable oxygen and emergency oxygen systems to keep them healthy, alert and safe in the air.

For more information about any of products or to learn more about our custom system design capabilities, please visit www.aerox.com, call 1-800-237-6902 or email [email protected]